iPhone – Redsn0w 0.9 final – Jailbreak Iphone 3.1.2 Firmware

The final version of redsn0w 0.9 is now available for download. For those of you who don’t know, Redsn0w is an alternative jailbreaking tool to blackra1n for both Windows and Mac. It also enables users to personalize iPhone firmwares with customized boot and recovery logos without having to use iTunes as there are no custom IPSW files involved. If other jailbreaking tools such as blackra1n, PwnageTool and sn0wbreeze didn’t work for you, you can always give redsn0w a try to see if it solves all your problems.

New to this final release is added support for 3rd-generation iPod touch and IPCC tethering. Redsn0w supports jailbreaking on iPhone 2G/3G/3GS and iPod touch 1G, 2G and 3G. Instructions for jailbreaking using redsn0w are exactly similar to the beta release, which was released earlier this month. Follow the complete step by step guide posted here to jailbreak your iPhone and iPod touch using redsn0w.

NOTE: Late models of iPhone 3GS, iPod touch 2G and iPod touch 3G are all restricted to “tethered” rebooting. That means you need to connect your device to a computer to complete the boot after a reset. Also, these devices cannot have custom logos.
redsn0w 0.9 (final version) for Windows
redsn0w 0.9 (final version) for Mac

Infinity Box – ChineseMiracle v3.08 released

- test mode operations improved
- MT6225 firmware – detection improved
- MT6225 touchscreen calibration – operations improved
- MT6225 sp-unlock – operations improved
- MT6225 user code – operations improved
- MT6225 safe format – operations improved
- bad software – operation improved
- security area – repair improved (78 new firmwares supported)
- bootloader – detection improved
- firmware – database updated
- new flash files uploaded in support area
www.infinity-box.com

Octopus box – New Flash Files Uploaded

Added firmwares for:
BL40e
* BL40e-V10f-NOV-23-2009-OPEN-CN
* BL40e-V10i-DEC-09-2009-BUM-CN
BL40f
* BL40fAT-01-V10a-724-05-OCT-16-2009+4
* BL40f-V10a-OCT-12-2009-VIVO-BR
BL40g
* BL40g-V10a-OCT-13-2009-TELUS-CA
GS190
* GS190-00-V10e-404-XX-NOV-25-2009
* GS190-00-V10f-404-XX-DEC-30-2009
GS200
* GS200-00-V10c-AME-XX-NOV-25-2009
* GS200-00-V10c-CIS-XX-NOV-05-2009
https://www.boot-loader.com

SCout – New *.pcf files added to SmartMoto and SCout sections

Added new firmware for CDMA models:
* W315
o Generic DST
Added new firmware for:
* Z10
o MODEM4_U_40.1A.24R (Claro_Brazil, Retail_Brazil, TIM_Brazil)
* W388
o 0.1.43
www.boot-loader.com

Infinity Box – Motorola WX395 model supported

“MModule” v3.05 released:
.Motorola-WX395 model supported
.ZTE-X960 unlock improved
.SFR-342 unlock improved
.imei detection improved for Alcatel models
.bootloader detection improved
.firmware database updated

WARNING: always make full flash backup before WX395 unlock/flash procedure due to tests was done for limited number of phones !
www.infinity-box.com

Z3X BOX Samsung – Smart Phone tool 2.3.05 update

Added:
GT-B7300C support (direct unlock/imei) smart algo for all known version – First in the world via USB cable only
GT-i8000N support (direct unlock/imei) smart algo for all known version – First in the world via USB cable only
GT-i8000T support (direct unlock/imei) smart algo for all known version – First in the world via USB cable only
GT-b7610N support (direct unlock/imei) smart algo for all known version – First in the world

Cable manual for i8000 and B7300 pcb rev:B (without rx tx on pcb).
1. Download DataConnection.zip from support 1.sofware/samsung box/
2. Unzip DataConnection.exe to MMC card.
3. Run DataConnection.exe via phone explorer. – and select phone usb
4. Connect micro USB cable to pc.
5. PC will detect new device diagnostic port.
6. Setup drivers.
7. Type on phone *#9090# than choose 1
8. Choise com port number of diagnostic port in z3x sw.
9. Press imei/unlock button.

Z3X BOX LG – BL40 unlock, imei repair added

LG Qualcomm Tool 1.7.8
Added:
- BL40 full support ( direct unlock, imei, flashing, nvm read/write, nvm write) First in the world
Unlock/ Imei repair procedure:
1. Flash patch fimware to phone: BL40-V10b-AUG-21-2009-ORG-UK_PATCH_UNLOCK_v1.crp1
2. Use imei or unlock button (For Security reson for using IMEI or UNLOCK Button it is necessary Internet connection)
http://www.z3x-team.com/

MT Box Nokia – MTB NK v2.11

Release note:
Fixed:
* Unlock button says no WOTP activation
* Removed SL3 phone check because mtb_nk.exe incorrectly identifies 5800 as SL3 phone

Download and use exe files downloaded only from:
* GT support zone (login using MT Box update tool)
* www.mt-box.org
* http://forum.gtibox.com/ from Software Updates pages only (in this section can post Product supporters only)
* www.griffinteam.net

Download:http://www.griffinteam.net/cms/download/software/mtb_nk/MTB_NK_v2.11.exe