New features:

MTK CPU:
* MT6238/9 supported
* Added new bootloader, Support Read/Write/Expert Mode
* Added Repair IMEI by AT Command
* Backup/Restore/Edit/Debug NVRAM items, With this u can restore everything after format phone
* Read Project ID
* FAT Explorer
* Tracker improved
* Support new Decryption of UID on MT6235
* Support new ExtractFile and Decryption of UID function on MT6235
* MT6253 supported
* Added new Boot3.952

SpreadTurm CPU:
* Support new Flash device: M36L0R7050U3ZS, 3040L0xx0
* Support NOR_4050L0YQ3 on SC6600L

Universal:
* Added new status bar to display H/W information. If any unsupport Flash device, then please send the Flash ID and real Flash name to support@uct.cc
* Added new special format for Read files, It will include HW/SW info and save as a cmz file.

Bug Fixes:
* Fix Flash ID error on MTK Boot3.848
* Fixed synchronization failure when baudrate change in MTK Phones
* Read unlcok code issue for SpreadTrum phones
* Fixed some UI error

Support New Flash Chip:
* NAND_H8BCS0SI0MBR
* NAND_K522H1GACE
* NOR_AMD_29lv320DB
* NOR_AMD_29lv320DT
* NOR_AMD_29lv320MB
* NOR_AMD_29lv320MT
* NOR_AT49BV_LV16X
* NOR_AT49BV_LV16XT
* NOR_EON_EN29GL128
* NOR_Intel_28F128J3
* NOR_Intel_28F160B3
* NOR_Intel_28F160B3_T
* NOR_Intel_28F160C3
* NOR_Intel_28F320B3
* NOR_Intel_28F320B3_T
* NOR_Intel_28F320J3
* NOR_Intel_28F320J5
* NOR_Intel_28F320S3_5
* NOR_Intel_28F640B3
* NOR_Intel_28F640B3_T
* NOR_Intel_28F640C3
* NOR_Intel_28F640C3_T
* NOR_Intel_28F640J3
* NOR_K5N2833ATB
* NOR_K5N5666ATB
* NOR_K8D1716UBC
* NOR_K8D1716UTC
* NOR_K8D3216UBC
* NOR_MBM29LV160B
* NOR_MBM29LV160T
* NOR_MBM29LV320BE
* NOR_MBM29LV320TE
* NOR_MX29GL128B
* NOR_MX29GL128E
* NOR_MX29LV161B
* NOR_MX29LV161T
* NOR_MX29LV320B
* NOR_MX29LV320B_T
* NOR_MX29LV320T
* NOR_MX29LV320T_T
* NOR_Sharp_28F320BJE
* NOR_SHARP_LH28F160S3_T
* NOR_SST39VF1601
* NOR_SST39VF1602
* NOR_SST39VF320
* NOR_SST39VF3202
* NOR_SST39VF6401
* NOR_SST39VF6401B
* NOR_SST39VF6402
* NOR_SST39VF6402B
* NOR_ST_29w320DB
* NOR_ST_29w320DT
* NOR_ST_M29W160EB
* NOR_ST_M29W160ET
* NOR_TC58FVB321
* NOR_TC58FVT321
* NOR_TC58FYM7T8C

* Please Un-Install Old Version before installing v1.05
* All files ready for download in official setup area.

Mirror for setup: http://www.uct.cc/UCT_Setup_v1.05.exe

No Comments »
Filed under: ET-BoX, Hardware products, Unlock Solutions

ET-BoX Plus Team in association with UCT Softwares is proud to announce finally release of its new platform for chinese phones : ET-Box Plus China Tool
With this New ET-BoX Plus China Tool, all ET-BoX Plus users can now do a lot extra with chinese phones. Like 2nd IMEI Repair, Touch Screen Caliberation, SpreadTrum support and much much more. This software is free for all ET-BoX Plus users.
Features:
* Pin-Finding for MediaTeK (MTK), SpreadTrum (SPD), SkyWorks, Analog Devices (ADI), NXP (Philips), Silicon Labs, Infineon & Anyka

MediaTeK (MTK) Features
* Read Information about phone
* Read / Write full flash
* Format FFS / Reset phone
* Repair “Bad Software”
* Repair “Phone / User / Network / Sim Lock” without Formating
* Repair & Write IMEI for Sim1 & Sim2 (with Auto Checksum)
* Read / Write / Edit Phone Book
* Backup & Restore Touch Screen Calibration settings
* Touch Screen Calibration Bypass
* Many many more…

SpreadTrum (SPD) Features:
* Read Information about phone
* Read / Write full flash
* Format FFS / Reset phone
* Unlock Phone
* Repair & Write IMEI

SkyWorks Features:
* Read / Write full flash

Analog Devices (ADI) Features:
* Read / Write full flash

NXP (Philips) Features:
* Read Information about phone
* Read / Write full flash

SiliconLabs Features:
* Read Information about phone
* Read / Write full flash
* Format FFS / Reset phone
* Unlock Phone

Infineon Features:
* Read / Write full flash
* Decrypt File for edit

Anyka Features:
* Read Information about phone
* Read / Write full flash
* Unlock Phone

Software and manual is ready in support area.
Mirror 1 : http://rapidshare.com/files/317743658/ET-Plus_China_Tool_v1.02.zip
Mirror 2 : http://www.et-box.org/ET-Plus_China_Tool_v1.02.zip
Mirror for Manual : http://www.et-box.org/ET_ChinaTool.pdf

Comments Off
Filed under: ET-BoX, Hardware products, Unlock Solutions

[hidepost]# Auto Pinout Finding features added for ET-BoX PLUS users
# Quick Pinout Finding for MTK & Infenion CPU
ET-BoX Plus Auto Pinout Finder User Manual
Connecting the ET-BoX Plus and the Phone:
1. Connect the ET-BoX Plus to PC USB Port
2. Connect Main Cable to the “24-Pin Intelligent connector” from the side where power leads are coming out.
3. Connect the Power leads to the phone battery connector & the Phone cable to the phone connector.
Software Instrctions:
1. Open ET-BoX Software, select the ET-BoX Plus COM Port & then press “Connect Port”.
2. Go to the “Chinese MTK” Module and press “MTK Quick Pin-Find”
3. If everything is OK, then ET-BoX Plus will make a Beep-Beep Sound and the Information window will show you the details of your box.
4. Now press & hold the power button on the phone and then press “OK” on the Information Screen.
5. ET-BoX Plus will make a beep sound that means it is now working to find the pinouts for the connected phone. It should normally search pinouts for MTK CPU phones in less than 4-6 Seconds, but can take upto 30-40 Seconds.
6. As soon as pinouts are found, ET-BoX Plus will make another beep sound. Release the power button of the phone.
The Pinouts of the phone have been found and defined to the box. ET-BoX Software is now ready to Connect to the phone.
Trouble-Shooting
Q. Software is not able to find the ET-BoX Plus hardware & shows this error:
Seeking ET-BoX Plus hardware …
Can’t find ET-BoX Plus hardware
Operation failed
A 1. Maybe you are not using The New ET-BoX Plus Hardware. Pinout Finding only works with the New ET-BoX Plus.
A 2. If you are using ET-BoX Plus and still you are getting this error, then it can be because of selecting wrong COM port number. Check which com port is the ET-BoX Plus connected and then try again to connect.
Q. ET-BoX Plus is not able to find the pinouts of the phone & shows this error:
Can’t define pinout
Operation failed
A 1. 1st reason can be bad connection or maybe not holding the power button during the whole pin-finding process.
A 2. Still if everything has been connected ok, then it is posible that the phone you are tying to connect does not have a MTK CPU inside. In this case please try procedure for Infenion Pin-Find.
ET-BOX_1_84.zip:http://rapidshare.com/files/230849395/ET-BOX_1_84.zip[/hidepost]

Comments Off
Filed under: ET-BoX, Unlock Solutions, Unlocking

[hidepost]ET-BoX v1.81 Beta Released
* Added Direct Unlock for Samsung CDMA SCH-B239, B259, B279, F679, S259, S269, S299, S339
* Bug fixed with Vodafone and Chinese Infineon connectivity
Supported Models:
* SCH-B239 Raaga
* SCH-B259 Superhero
* SCH-B279 vRage
* SCH-S259 Explore
* SCH-S269 ChampFM
* SCH-S299 vSwing
* SCH-S339
* SCH-F679 MAX
Supported Feature:
* Direct Unlock in less than 1 Second
Instructions:
1. Connect cable to phone and power on the phone, wait 5 seconds
2. Press “Connect Phone” and then press “Direct Unlock”
3. Phone will restart means phone unlocked, if not restart then press “Direct Unlock” again
www.et-box.net
Ps. I am new in CDMA phones, so dont expect much about it.
Mirror: http://rapidshare.com/files/220997929/ET-BOX_1_81.zip[/hidepost]

Comments Off
Filed under: ET-BoX, Unlock Solutions, Unlocking