Bug fix: missing definitions for RAPU 25xx loaders
were missing and files were not copied to SD card
Download
http://www.genieprojects.co.uk/files/uGenie_0.12.zip

This update utility for Genie Universal Device allows update of Genie firmware(OS) as well as
all files and applications on the SD card. Fully standalone, also supports device recovery and
purchased Apps online update.

New version of uGenie is ready for download. For those who don’t know yet,
uGenie is the latest update/management utility for your Genie device.

What’s new in v 0.11:
- Nokia N8 logging script support added
- New Sedna OS v 1.66 added

Download link

What’s new:
- small bugfixes on the UI
- added ability to update purchased applications via
new button in the Applications menu
- SDK removed from uGenie package
- version 0.2 of the UserGuide added, to explain new
features added to uGenie.exe
http://www.genieprojects.co.uk/files/uGenie_0.10.zip

New version of uGenie update package. What’s new:
- Important bug fix regarding recovery mode
Download from here. To recover dead devices, tweet me @bphreaks

bb5all.exe v 0.164
- Support for standalone SL3 log reading on RAPU CPUs with hash 25B9…
- Support for standalone SL3 log reading on RAPv4 CPUs with hash 7B04…

Multiphone reading in Auto mode is supported for those new hashes too.
Just start in Auto mode and all logs will be saved to the SD card.

Credits: Vesko & Stuny for the original Timer hack, DK for porting to those new CPUs

Please do full card update, no need to update OS if you have the latest version.
Download

TDS Tool – Free Nokia DCT4(+) RPL Calculator v 1.0
This small utility allows of standalone calculation of
RPL files for the DCT4 and DCT4+ generation of Nokia
mobile phones. The files are compatible with all models
that have the combination of UPP + UEM chipset. Generated
files contain 2 sections: DATA1 and DATA2, those are needed
as follows:

DATA1 – data goes into HW PMM area of the phone(bottom 0×100 bytes
in the flash chip)

DATA2 – data goes to the OTP area of the UEM chip, used by HW logic
to lockdown security watchdog timers

Both areas are related, as DATA1 contains encrypted UEM WD unlock password
To calculate just enter UEM/ESN and press Calculate. File will be created
in the program directory. Then load to the phone with your favourite flasher.
This is a free release, with the hope will be usefull to the community.
For any questions: @bphreaks on Twitter
Link:
http://www.genieprojects.co.uk/files/TDSTool.zip

New Genie Suite 1.2 Released, download here

Includes:
-uGenie for Updating, Repairing and Customizating your Clip
-Remote Tools 0.35

It will uninstall previous Version, and install the new one.

Please download latest RemoteTools v 1.35 from here.

The whole procedure:
1. Connect your phone to Genie, Run bb5all.exe. Press Unlock. The .log will be saved to Files/Nokia
2. Go to 1 for all other phones
3. When you go home, plug Genie to the usb of your PC, start Disk mode and get all .log files
4. Run your heater(Super Pc) on each .log file, till you get corresponding .cod file
5. Start RemoteTools v 1.35 and using correct login, upload each .cod file with the SL3 Final button
6. Wait at least 10 minutes for final processing to be done, otherwise this:
7. Press the SL3 Status button, should get this:
8. Enjoy

More Details
This Update Is For Offline Brute Forcing
1 :Make Log File
2 rocess Log File In Ighashgpu Brute Forcer For Needed Code File
3 rocess Code File In New Remote Tools For Unlock Code

We have a small, new utility that is suppose to make update and maintain of your Genie device easier.
Merry Xmas and Happy New Year to all Genie users!

v 0.0.1.12
- New updated application loader, allows
faster upload of applications to our FTP,
plus improved Genie start up speed of apps
- changed the static ram usage of the
Sedna scheduler, the way all drivers
are executed and other improvements
- Os, copyright and year string to be
displayed by UI
- Removed printing of Free Ram
- The Genie logo will be restored to
Flash after USB Os Update on first boot up
- Major rework on the LCD driver
- Improved stack usage of the main UI task

2.New Genie standalone application: bb5all.exe
- Ability to safely unlock all bb5 phones PA_SL, PA_SL2 and PA_SL3
- Standalone operation
- Safe – unlock is via code(warranty preserved)

Notes on this App: It is created to replace the 2 years old bb5notp.exe
There are some models not yet supported (PA_SL2, RAPIDO, new PM enc),
to be added in next version. SL3 phones save log file, to be uploaded to
our server for later processing. Some other cool features to be added
in following versions. SL3 hashes – 25xx and 47xx not yet supported also.
Logs will be saved to Files/Nokia in format xxxxxxx.sl3(where x – last 7 digits
of the phone imei). Logs are not yet supported by Remote Tools for upload

3. BB5Notp.exe
The good, old bb5notp.exe is no longer supported. It has done its work
during last 2 years, unlocking hundreds of thousands of bb5 phones.

How to update:
1. Wait 2-3 hours from the time of this post
2. Update your SD card contents to the latest files using the Genie Update
Client
3. Update your OS using USB cable and Remote Tools – 0.34
4. Enjoy

Please if you have devices for update – do not try to update using older
version of the OS ( 0.187 – 0.197), it will result in blue screen. In case you
do this – do not panick, just update your SD card and press Update in Remote
Tools.

Genie Universal Firmware Release Notes:
- This update addresses bugs from previous
version regarding file system api
- Compatibility restored for bb5notp.exe,
fls5.exe and pkd1.exe
Use Update Client First Then Update Os With Genie Remote Tool

V 1.0.0.34
- Critical bug fix regarding USB update of Genie
Firmware. Clicking onto another program, then clicking
in Remote Tools was crashing the USB comunication during
OS update and causing the device to go to blue screen mode

Download:
http://www.b-phreaks.co.uk/files/RemoteTools/RemoteTools_0_34.zip

You need to use this version if you want to update your Genie, because older versions of Remote Tools will not work.

Latest Genie-Universal Software:
Genie Suite v1.14
Remote Tools V 1.0.0.33

Latest SD-Card-Content on Serve
Updated on: 22/04/2010 (new DCT4ALL.SMX Unlock Script – All DCT4plus RSA Unlock supported)

Latest Genie-Universal Device Firmware:
v.0.0.0.192 (updated on 22/04/2010)
(Firmware Update File is included in latest SD-Card Content – Please Update with Remote-Tools v1.0.0.33)

What´s new:
Free DCT4++ RSA Unlocker (dct4all.smx – All DCT4 Unlocker v0.1)
-Supports RSA Unlock and repairs damaged Simlock-Data on ANY DCT4+ ASIC11 phone in 2 seconds

Old dct4plus.smx Script for dct4 patch-unlock is OBSOLETE NOW!

Added unlock function for bulk
At the end of the unlocking, press the left Button “Unlock”
if you have not finished your phones.

Also some scripts have been added to the “Scripts” folder
- G-Nok.smx

Features:
- Support Keypad Press on Genie
- Phone mode selection such as Local, Normal, Test mode
- Full factory reset for all DCT4 and BB5 Phones
- Lcd contrast reset for 1110i, 1112, 1200 and some other..
- Phone Info (Not implemented yet)

- userc.smx History
Standalone BB5 User Code Read

- bb5rlt.smx History
BB5 Life Timer Reset Application for Clip
Please update your SD card contents with the Genie Client.

Here is complete list of supported DCT4+ phones
Nokia 1680c – RM-394 v06.82, v07.60
Nokia 1680c2 – RM-395 v06.82, v07.60
Nokia 1680c-2b – RM-490 v06.22
Nokia 1680c-2b – RM-490 v06.83
Nokia 2220s – RM-590 v09.55
Nokia 2320c – RM-514 v06.75, v08.20
Nokia 2320c-2b – RM-515 version 06.88
Nokia 2330c – RM-512 v06.46, v06.75, v08.20, v08.21, v09.55
Nokia 2330c-2b – RM-513 v08.20, v08.21
Nokia 2323c – RM-543 v06.46, v06.75, v08.20
Nokia 2600c – RM-340 v07.60
Nokia 2610 – RH-86 v05.90, v07.04
Nokia 2610b – RH-87 v05.90, v07.04
Nokia 2630 – RM-298 v07.60, v57.20
Nokia 2680 – RM-392 v04.56, v05.25, v06.17, v56.17
Nokia 2720f – RM-519 v08.20, v08.42, v09.55
Nokia 2720f-2b – RM-520 v08.62, v08.20, v08.42
Nokia 2760 – RM-258 v06.82, v07.60
Nokia 2760b – RM-259 v06.82, v07.60
Nokia 2760-2b – RM-391 v05.45 v06.83
Nokia 5000 – RM-362 v06.32
Nokia 7070 Prism – RH-116 v07.60
Nokia 7100s – RM-438 v05.22, v05.41, v06.31, v06.32

Added support for the following phones:

Nokia 7070 Prism – RH-116 version 07.60
Nokia 2760 – RM-391 version 06.83
Nokia 2680 – RM-392 version 05.28
Nokia 1680c – RM-394 version 07.60
Nokia 1680c2 – RM-395 version 07.60
Nokia 1680c-2b – RM-490 version 06.22
Nokia 1680c-2b – RM-490 version 06.83
Nokia 2320c-2b – RM-515 version 06.88
Nokia 2720f – RM-519 version 09.55
Nokia 2720 – RM-520 version 08.62
Nokia 2220s – RM-590 version 09.55

Please visit Genie Universal
to download the latest DCT4Plus installer:
http://www.genieuniversal.com/downloads.html

There is a new version of the DCT4+ script.
Just added print out of flash chip ID on the screen so we can debug problems
Please download the latest version from the FTP server.

V 1.0.0.33
- New button added – SL3 Cancel to allow canceling of jobs on the server. IMEI of the job needs to be inserted
in the Imei to Cancel box first.
Download:
http://www.b-phreaks.co.uk/files/RemoteTools/RemoteTools_0_33.zip

Finally it´s done, Genie-Universal goes SL3 now!

How does it work?
You need latest Remote-Tools Version 1.0.0.32 from download section
and a Genie-Universal Server Account with at least 249 credits
Simply connect your Genie-Universal to PC USB Port, enter your Username/Password
and press button “SL3 Request”.
Phone Informations will be read from phone and submited to the Server. After that you just need to wait for the code to be calculated.
You can check the status of your code calculation by pressing the “SL3 STATUS” Button.
Once your code-calcution started you will see the progress in percent, if there is
another calculation running already, you will see “idle” message.

Turnaround time for Codes:
Turnarround time depends how busy the Server is, could be done within few hours,
but could also take up to few days in case there are many requests pending.
PLEASE DO NOT SUBMIT A PHONE IF YOU DON´T HAVE TIME TO WAIT FOR THE UNLOCK-CODE!!

Currently supported SL3 Models:
- N97
- N97 mini
- 5310
- 6303
- 3600
- 5130
- 6500s
- etc.

How much Credits will it take and where can i buy credits?
The current Credit consumption for a SL3 unlock is set to 249 credits.
Credits can be bought from official Genie-Universal resellers arround the World.

Here are latest Genie updates:

1. We have new version of Remote Tools today, v 1.29
2. Also glad to notify Genie users – now RPL calculation service on our server is
fully free to all Genie users:
- No need to have account
- You can do Simlock RPL for all BB5 (except SL3)
- You can do SuperDongle RPL for all BB5

3. Major bug fix on the two genie device drivers
4. And offcourse the SX4 auth is fully standalone with Genie – no need for
internet connection, Smart Card etc.

New Genie Suite 1.1 Update incl. PM Tool v0.5 ready for download.

Requirements:
-Genie OS Firmware 186r

How to:
Download latest Genie Suite 1.1 from here
Uninstall old Suite, and Install GenieSuite1.1
your clip must have at least v186r in order to update 191r,
if your clip has not fw 186r, you need to update it manually:
-download osim.sef 186r from here
-extract osim.sef to your system folder while overwriting old osim.sef
-restart clip, press firmware update
your clip is 186r:
-connect clip via USB MODE to pc
-open GenieSuite1.1
-click Genie Update Client
-Get Drive, mark Genie10xxxx, press Update
-restart Genie, press right button, USB OS UPDATE
Open SL X Remote Tools 0.28:
-go to About Tab, Press Update OS

after that your Clip is 191r, and you can use new PM Tool v0.5 by
clicking PERMANENT MEMORY TOOL in GenieSuite1.1

New Update has following fixes and updates:
-Standalone Custom SX4 Auth
-GenieSuite1.1 incl Manuals and no fonts on classic theme fixed

DCT4+ Standalone Unlocker Script V 0.3

v 0.3
some bug fixes

Requirements:
The 4plus.smx standalone DCT4 Plus unlocer
requires Sedna OS version 0.0.0.183 which
you may donwload and update on your clip.

Added support for the following phones
Nokia 2610 – RH-86 version 05.90, 07.04
Nokia 2610b – RH-87 version 05.90, 07.04
Nokia 2760 – RM-258 version 06.82, 07.60
Nokia 2760b – RM-259 version 06.82, 07.60
Nokia 2630 – RM-298 version 07.60, 57.20
Nokia 2600c – RM-340 version 07.60
Nokia 5000 – RM-362 version 06.32
Nokia 2760 – RM-391 version 05.45
Nokia 2680 – RM-392 version 04.56, 06.17, 56.17
Nokia 2330c – RM-512 versions 09.55
Nokia 2330c – RM-513 versions 08.20, 08.21
Nokia 2720 – RM-520 versions 08.20, 08.42
Nokia 2323c – RM-543 versions 06.46, 06.75, 08.20

Please download your DCT4Plus installer from
http://www.genieuniversal.com/downloads.html – DCT4Plus v0.3

Please make sure that you run your Genie in Mass Storage Device
mode in order to have the files installed on your SD card.

Here a minor release to fix some bugs in previous Major release:

1. Remote Tools:

V 1.0.0.25
- Bug fix when wrong credits value was shown after
free code reading
- Bug fixed when UN/PW is required for free code
reading

Download:
https://www.b-phreaks.co.uk/files/RemoteTools/RemoteTools_0_25.zip
2. Standalone DCT4+ unlocker script – fixed to run on OS version 0.183
The script is attached, please download, unzip and put in your Programs/Script
directory.

Remote Tools:
V 1.0.0.24
- Support for SL3 data requests and status check. No
more need for separate executable for Beta testing
of SL3 Unlock, all is activated based on the user
server privileges
- User Name and Password boxes moved to the About menu.
The login credentials will be saved to the ini file
regardless if use server check box is selected
- New loaders added for not supported RAPIDO hashes
Now will be possible to unlock E63 v200 via RPL file (thanks
to James for the test phone !)
- No more need for good quality cable with RX2 connection
this should increase the comm stability with the cables in
mass use
- Super Dongle data added to calculated RPL file
- No more need to have 200 credits for the code reading
function

Nk4c.exe – the standalone DCT4/DCT4+ calculator for Genie:
V 0.0.0.18
- No more need for standalone credits in the device to
calculate files

Genie OS:
v 0.0.0.183
- Support for latest version of RemoteTools
- It is no longer possible to run plain Pawn
scripts. Please if you use your Genie to code
custom Pawn scripts – do not update to this version

NSS server version 0.114:

- No need to have 200 credits in the account to read unlock codes from
BB5 phones (PA_SL, PA_SL2)
- Reading of codes on all models except PA_SL3 is free (incl hash 9DDB…)
- Generating RPL file with simlock data + super dongle data cost 8 credits
on all BB5 models(incl hash 9DDB…)

To use this update please folow this procedure:

1. Update your SD card contents from the FTP
2. Update your device to 0.183( please check history.txt first !!!)
3. Download updated executable from the provided link

RemoteTools v 0.24:
http://www.b-phreaks.co.uk/files/RemoteTools/RemoteTools_0_24.zip

Standalone DCT4 Plus unlocker for new UPP ID 3186.

Currently only few models are supported, but we will work on this
to add more and more models.

The unlocker script is located in Programs\Script\4plus.amx

When you run the script, it will performe phone check if the
attached phone is supported. Then it will unlock the phone.

Currently supported phones are:
Nokia 1680c – RM-394 version 06.82
Nokia 1680c2 – RM-395 version 06.82
Nokia 7100s – RM-438 versions 05.22, 05.41, 06.31, 06.32
Nokia 2330c – RM-512 versions 06.46, 06.75, 08.20, 08.21
Nokia 2320c – RM-514 versions 06.75, 08.20
Nokia 2720f – RM-519 versions 08.20, 08.42

Please download the installer from Genie Universal Downloads – DCT4Plus v0.2
In order to install the standalone DCT4 Plus unlocker, you have to connect
Genie universal in Mass Storage Device mode.
The installer will search for connected Genie and will select the destination
SD card on Genie.
After sucessfull install, you have to upgrade your Genie operating system
to v 0.0.0.181. This is in order to have support for DCT4 Plus unlock.
Please note that this is initial version and there might be some bugs.
http://www.genie-universal.com/

Genie Suite v1.0
All Applications and Drivers included in Installer Package.
The Suite Contains:
-SL X Remote Tools (Unlock and Repair Tool for Nokia BB5 Phones)
-DCT4Plus Unlock (Unlock Tool for Nokia DCT4Plus Phone)
-DCT4/DCT4Plus RPL Calculator (Repair App for Nokia DCT4/DCT4Plus)
-Permament Memory Tool (Read/Write PM of Nokia Phones)
-Genie Update Client (Updates Genie Clip to latest Version)
-FTP Support Tool (access for ftp support server)
The Suite can be downloaded here or on official webpage www.genieuniversal.com

This software will be the successor of the old BB5 Logger. What’s new:
V 1.0.0.17
- New look
- Ability to read BB5 codes from SL1/SL2 phones. This
will require activation of 200 credits in your account.
RAP3 phones with hash 9DDB will take credits from your
account based on current RPL price
- The latest version of the script is 0.72 (required)
will keep the phone powered on all the time, so delays
for every FBUS command will be skiped (boot delay)
Download

[hidepost]New version of the Genie BB5 realtime logger for all BB5 phones.
This tool is able to repair bad simlock data on almost any Nokia BB5
phone and rebuild the security area when damaged by some 3th
party tool or when phone flash is erased.
- Major improvments on the program usability
- Operations are split into separate Tabs, main
Tab is the Logger, where you can read/write etc
Options tab is for settings and server details
- Ability added to check credits on the server
(Check Credits button in Options Tab)
- Improvments on Upload credits menu, now backup
could be auto re-used for upload in case of server
error. Also selected UN/PW will be printed on screen
- Program will save username and password to the
bb5logger.ini file if you keep the ‘Use Server’ box
selected before closing. So on next start your details
will be ready for use
http://www.b-phreaks.co.uk/files/GenieLogger/logger.zip
Latest news, updates: http://www.news4gsm.com[/hidepost]

[hidepost]Permanent Memory Tool v0.4 released
- Added support options for SX-4 Authentification via local SX-4
- Better improvement on communication bus handle
- Improvement on product code reading
Download: http://www.genie-universal.com/?page_id=10[/hidepost]

[hidepost]Permanent Memory Tool v0.3 released
- SX-4 Authentification via online SX4
- Full Permanent Memory erase added
- Improvement on reading phone information
- Bugs fixed on SX4 authentification time-out
- Read/Write of RAP3v3 model (5310,6500,6600, etc) bugs fixed
How to use?
1) Make sure Phoenix or FLS-5 drivers is installed in your PC
2) Run Fls5.exe in Genie Universal device.
3) Attach your phone on Genie
4) Click “Connect” on Genie Permanent Memory Tool (Make sure phone in Local Mode)
5) Click “READ” to read full PM or click “Write” to write selected PM.
**REMEMBER TO MAKE BACKUP OF PHONE PM BEFORE USING Full ERASE!!!
**All BB5 Phones PM write is required for SX4 Authentification
**For SX4 Authentification, make sure your internet is ON!
Download Link: http://www.genie-universal.com/?page_id=10[/hidepost]

[hidepost]Genie FTP Support Tool Released v0.3
- Options on type of region added.
- Europe FTP server added.
- Improvement on VCOM auto search.
Download Link: http://www.genie-universal.com/?page_id=10[/hidepost]