Broadcom LBF data read FREE of charge

What’s new:

- As we promised when first box add read LBF data for free we add it also.
- All changes are on server side, so no more 5 credits will be deducted from your MT box account for Broadcom LBF data read.
- To read LBF data for Broadcom phones you need to have MTB v2.41 installed
- All changes are made right now

What’s new:
Added support for USB read Broadcom models all rootkey hash versions
Unlock supported using GT server and LBF (local brute force)
Supported imei backup and SX4 repair
Unlock using GT SL3 server cost 40 credits
Cancel SL3 brute force for Broadcom models will require 5 credits per phone

Supported phones:
C3-00 RM-614
X2-00 RM-618
X2-01 RM-709
X2-03 RM-709
X2-01.1 RM-717
2710c RM-586
7020 RM-497

Please note:
To use MTB NK v2.41 you need to have installed MTB NK 2.38.6 setup
After software installation do not forget to update your MT Box using MT Box update tool v3.24
This is BETA release so please if you found any bug report to us

What’s new:
Added support for USB read of EFUSE for RAPUv21, RAPU all rootkey hash versions
Unlock supported using GT server and LBF (local brute force)
Supported imei backup and SX4 repair
Flash already supported in previous version
Some SL3 server side changes (to be ready for emergency situations)
Supported phones:
Nokia 500 – RM-750
Nokia 600 – RM-701
Nokia 700 – RM-670
Nokia 701 – RM-744
Please note:
To use MTB NK v2.40 you need to have installed MTB NK 2.38.6 setup
After software installation do not forget to update your MT Box using MT Box update tool v3.24
This is BETA release so please if you found any bug report to us
Download:
MTB NK 2.40 -Rapid Share

What’s new:
• Nokia egold platform flash over FBUS supported
• Fixed some bugs in communication

Please note:
To use MTB NK v2.39.1 you need to have installed MTB NK 2.38.6 setup

Download:
MTB NK 2.39.1 – Rapid Share

What’s new:
• Added support for MT Box with serial 4xxxxxxx (Symb inside, DB2020 inside, DB3xxx inside and MT2COM)
• Added support for Win 64
• Added new SonyEricsson drivers required for Win 64 (ggsetup-2.2.0.5.exe) for db2020 and db3xxx
• Added Symbian drivers (open_4.40.6.0_usb_signed_drivers)

Download

What’s new:
• Fixed rapido flashing over FBUS
• Fixed serial communication over FBUS ( fixes problem where on some hubs box will hang when doing serial communication)

Please note:
Is not possible to upload phones with older MTB NK version then 2.38.5.
You need to download and use latest MTB NK software (server message: e/155/please download latest software; )
To use MTB NK v2.38.7 you need to have installed MTB NK 2.38.6 setup

Download:
MTB NK 2.38.7 – Rapid Share

What’s new in SL3 LBF Shell v0.5:
• Added ighashgpu to hashcat file format convertor
• Some bugs fixed

How to use convertor:
• Start Shell software v0.5
• Download from GT server data for LBF ( data is ighashgpu format)
• Add to first line downloaded command from GT server
• If you like to convert ighashgpu to hashcat command format (for those who use hashcat without Shell software) click to “ighashgpu 2 hashcat” button.
• Software will make imei.bat file in same folder

Note:
You need to have in same folder hashcat and shell installed, then shell will make compatible bat file for that version of hashcat.

Download:
SL3 LBF Shell v0.5 – Rapid Share

What’s new:
• Fixed small mistake in message for SL3 upload for 20 digits code phones
• Added MTB NK version check on server side related to 20 digits code phones
• Disabled server access for all older version of MTB NK then 2.38.5

Please note:
Is not possible to upload phones with old MTB NK version. You need to use only latest MTB NK 2.38.5 or higher version of MTB NK (server message: e/155/please download latest software; )
To able use MTB NK v2.38.5 you need to have installed latest MTB NK v2.383. fixed setup

MTB NK v2.38.4 Released :
• Fixed USB reading for Rapido phones.

Please note:
To able use MTB NK v2.38.4 you need to have installed latest MTB NK v2.383. fixed setup

Download:
MTB NK 2.38.4 – Rapid Share

• Windows 64-bit supported
• Phones with 20 digits code will not be accepted to upload on calc queue

What’s new:
• Fixed problem with USB Test sys file
We are sorry for caused problem

Download:
MTB NK 2.38.3 fixed – Rapid Share

What’s new:
• Unlock over USB for SL3 phones for: Rapido, RapuYama, Rap3v4
• USB read for RPL on RapuYama, Rap3v4 ( certificates, simlock, sx4 (generate if doesn’t exist), wmdrm, cmla) – ( ReadImeiBackup button )

Notes on RPL functionality:
On USB full support for rapido is also available, but works on some of the models ( like n97) and is unstable or doesn’t work on others ( for certificate read)
Writing through USB: for certificates works fine on RAPU, RAP3V4, works on some rapido (n97)
For serial commands works ok if length of command is small
For large data FBUS needs to be used because Nokia software ( either driver or phone) blocks when it receive large command
We strongly recommend if the phone will be erased after backup, first try to write the RPL to make sure all data was backed up ok, and then
erase.

Please note:
Effectively if SX4 is damaged in order to repair it, one must make backup of RPL and then send the backup to phone using ‘Write RPL
BB5′. After that MT will be able to authorize sx4.

Download:
MTB NK 2.38.3 – Rapid Share

What’s new in SL3 LBF Shell v0.4:
• Support for HashCat LBF software v0.5
• Some bugs fixed

How to Start New Job:
1. Download and install SL3 LBF Shell software
2. Start MTB NK 2.37.3 or higher version
3. Go to SL3 BF compute tab
4. Upload phone to SL3 server using “Read” button in SL3 BF compute tab
5. Cancel phone from calculation queue, double click on phone imei in SL3 BF tab
6. Start MT tool v3.21 or higher version
7. Press “Download Zone” button
8. New browser window appears. We recommend to use Mozilla Firefox or Google Chrome as your default browser.
9. In “SL3 Service” tab click on “Get BF data” then insert imei from canceled phone
10. Check box “I agree my MT Box account to be charged 5 credits (non-refundable) to get SL3 data for local brute force for imei specified above”
11. Press “Get Data” button.
12. You will get necessary data for SL3 LBF Shell software.
13. COPY and SAVE BF data for example:
Quote:
ighashgpu -t:sha1 -salt:003542250374556200 -h:F8B4D8D05E7C71A7EAB8B12B6FF0B8EBB2B19DDD -uh:00010203040506070809 -min:15 -max:15
14. Start SL3 LBF Shell v0.4 software and paste in first software line (command line)
15. Press Start New Job button
16. Software start to work
17. You can see remaining average time to get code. Calculation time depend from cards you use
18. Please wait to software finish
19. When software finish copy all digits after word Found:
20. Login again via MT tool by pressing “Download Zone” button
21. Go to SL3 service than click “Get Code”
22. Enter calculated data (result from SL3 LBF Shell software) 15 bytes and imei.
23. If all is ok you will get unlock code for this IMEI

How to Stop Job:
1. If you click on Stop Job please wait to software finish already started part of calculation and write results in log file (*bf_job file). All files are saved to SL3 LBF Shell software folder in format “your_phone_imei.bf_job”.

How to Resume Job:
1. Start SL3 LBF software then click on Resume Job button
2. Software will ask you for bf_job file
3. Select desired job file and wait to software continue job

Please note:
• Windows 7 or Vista users must RUN software as Administrator. Because of some Windows rigid security restrictions. If not work install software outside Program Files folder.
• GET BF data is paid option. 5 MT Box credits are required to get LBF data
• ighashgpu and HashCat CANT be in same folder when you try to use LBF Shell!
• SL3 LBF Shell and ighashgpu.exe must be in same folder OR SL3 LBF Shell and HashCat must be in same folder.
• To able use SL3 Local Brute Force service you need to have minimum 50 credits on your MT Box account
• All support questions regarding SL3 Local Brute Force (hardware requirements etc….) need to be posted in dedicated forum section SL3 Local Brute Force – LBF
• Old version HashCat v0.3 is out from support by their coder and cant be used with latest SL3 Shell v0.4 to
• If you use Avast antivirus please take a look at picture bellow how to grant access to MT software

Download:
SL3 LBF Shell v0.4 – Rapid Share

What’s new:
• SL3 USB read support for RapuYama phones

How to read phone using USB cable:
- Power on the phone
- Connect USB cable to phone
- Select OVI suite or PC suite mode
- Please wait to driver installation finish
- Select USB mode in MTB NK software
- Press Phone info button
- If communication is ok, go to SL3 BForce tab
- Press Read button

More MT Box features to come very fast

Download:
MTB NK 2.37.3 – Rapid Share

What’s new:
• RPL fix for small lock definitions
• RAP3v4 SL phones unlock supported via server or LBF:

- 3710a-1 (RM-509)
- 3710a-1b (RM-510)
- 3711a-1 (RM-511)
- 6303ci (RM-638)
- 7230 (RM-604)
- X3-00 (RM-540)
- X5-01 (RM-627)

USB read for SL3 phones will be ready for 1-3 days.

Download:
MTB NK 2.37.2 – Rapid Share
MTB NK 2.37.2 – Mega Upload
MTB NK 2.37.2 – Media Fire
MTB NK 2.37.2 – Hot File

SL3 revised
now checks if phone is supported or not comparing code name (like RM-345)
now calculation time is better
This is an application for information purposes and checking by one mouse click thought USB interface/ No need NSM Account, no need NSM credits
The GriffinTeam SL3 Server time status (how many time next uploaded phone will be ready)
Phone model
Firmware version
Phone IMEI
Phone Product Code
Phone life timer
SIM-Lock Self-Test
SECURITY Self-Test
SUPERDONGLE Self-Test
SIM-Lock information (un/locked state, provider (key), config key)
Code Counters (by k’board & F-Bus)
Root Key HASH

MT-Box NSM v2.240 – AMOI based updated:

Versions supported of AMOI Manufacturer:
INQ1
Firmware Version: INQ1_V3.9.1_UK / FS V3.9.1 Compiled data: Dec 01 200809:33:30Nov 12 200822:00:00KYUZ

INQ1
Firmware Version: INQ1_V4.0.4_ITA / FS V4.0.4 Compiled data: Mar 06 200916:47:34Nov 12 200822:00:00KYUZ

MD1 – WPS1
Firmare Version: Wp-S1_V18.0
Firmare Version: Wp-S1_V18.5
Firmare Version: Wp-S1_V18.7
Firmare Version: Wp-S1_V21.0
Firmare Version: Wp-S1_V22.0
Firmare Version: Wp-S1_V23.0

WPS2
Firmare Version: S2_V14.4_UK

MT-Box NSM v2.240 – FREE NSM credits & accounts
For now you have opportunity to try MT-Box NSM (Nokia Support Manager) w/o any credits and accounts. We are enabled absolutely free trial accounts for :

Nokia Server#1 Download content about 300 GB – 24h TRIAL MODE !!
Nokia Server#2 Download content about 800 GB – 24h TRIAL MODE !!
Nokia Spare Part Finder – 24h TRIAL MODE !!
Nokia Language Pack Finder – 24h TRIAL MODE !!
Nokia Variants Finder – 24h TRIAL MODE !!
Nokia SL3 USB Reader (already free for all)
Nokia Navi Variants downloader – 24h TRIAL MODE !!
AMOI Unlocking / Repairing Module – 24h TRIAL MODE !!
ZTE / Momodesign / ZTE / Vodafone Module (Unlocking / Repairing – full service!) – 24h TRIAL MODE !!
Alcatel SP Code Reader – 24h TRIAL MODE !!
The NSM Files Requesting is not available for TRIAL users !

Access for NSM Servers and 4 NSM Credits (available beggining at 12:00 p.m 05/05/11 till 11:59 a.m 06/05/11) GMT +1.00 Zone:

user: demo01 pass: NSMdemo01 (free 4 NSM credits + NSM 24h limited account)
user: demo02 pass: NSMdemo02 (free 4 NSM credits + NSM 24h limited account)
user: demo03 pass: NSMdemo03 (free 4 NSM credits + NSM 24h limited account)
user: demo04 pass: NSMdemo04 (free 4 NSM credits + NSM 24h limited account)

What’s new:
• FBUS flashing fixed for RAP3 phones with original flashing algorithm
• SL20 RPL fixed for rapido phones
MTB NK 3.27.1 – Rapid Share

What’s new:
• SL3 unlock support extended with many new models. Phone hash does not important anymore.
• Backup and restore certificates over USB added

Price for unlock is 50 MT Box credits for all models.
Unlock for all phones is supported using FBUS only.

There is a list of all supported models with MT Box:
• 2690 – RM-635
• 2700c, 2700c-2 – RM-561
• 2730c-1, 2730c – RM-578
• 2730c-1b – RM-579
• 3600s – RM-352
• 3720c – RM-518
• 3720c-2 – RM-518
• 5130, 5130c-2 – RM-495
• 5130c-2 – RM-496
• 5228, 5230, 5232, 5233 – RM-588/593/594/625/629
• 5310 Xpress Music – RM-303
• 5530 – RM-504
• 5630 Xpress Music – RM-431
• 5630d-1 – RM-431
• 5730s-1 Xpress Music – RM-465
• 5800d – RM-356/428
• 6120c – RM-243
• 6300 – RM-217
• 6303c – RM-443
• 6500c – RM-265
• 6500s-1 – RM-240
• 6700c-1, 6700c – RM-470
• 6700s – RM-576
• 6710s navigator – RM-491
• 6720c – RM-424
• 6730c-1 – RM-547
• 6750 Mural – RM-381
• 6760s – RM-573
• 6790s – RM-492/599
• 7210c, 7212c – RM-436
• C3-01 – RM-640
• C5-00 – RM-645
• C5-03 – RM-697
• C6-00 – RM-612/624
• C6-01 – RM-601/718
• C7-00 – RM-675
• E5-00 – RM-632
• E52-1 – RM-469
• E55-1 – RM-482
• E63 – RM-437/450
• E66 – RM-343/345/420/494
• E71 – RM-346/347/357/407/493
• E72-1 – RM-530
• E72-2 – RM-529
• E73 – RM-658
• N8-00 – RM-596
• N86 – RM-484/485/486
• N97 – RM-505/506/507
• N97-4 mini – RM-555
• N97-5 – RM-553
• X3-02 – RM-639
• X5-01 – RM-627
• X6-00 – RM-551/559

Note:
Rap3v4 models to be supported during this week.

Download:
MTB_NK_2_37.ZIP

MTB CG (Credits Generator) Ver 1.5 released :
added next code calculation time information
Download: MTB CG Ver 1.5 SETUP

What’s new in SL3 LBF Shell v0.1:
• Support for start new LBF job using simple Windows software
• Support for resume LBF job
• Support to stop LBF job

This new software for MT Box allows you to stop and resume LBF (local brute force) job when you need.
This software allows you SL3 Local Brute Force calculation using ATI graphic cards.

How to Start New Job:
1. Download and install SL3 LBF Shell software
2. Start MTB NK 2.36.4 or higher version
3. Go to SL3 BF compute tab
4. Upload phone to SL3 server using “Read” button in SL3 BF compute tab
5. Cancel phone from calculation queue, double click on phone imei in SL3 BF tab
6. Start MT Tool v3.21 or higher version
7. Press “Download Zone” button New browser window appears.
We recommend to use Mozilla Firefox as your default browser.
8. In “SL3 Service” tab click on “Get BF data” and enter imei from canceled phone the press
“Get Data” button. You will get necessary data for SL3 LBF Shell software.
9. Copy BF data for example:
ighashgpu -t:sha1 -salt:003542250374556200 -h:F8B4D8D05E7C71A7EAB8B12B6FF0B8EBB2B19DDD
-uh:00010203040506070809 -min:15 -max:15

10. Start SL3 LBF Shell v0.1 software and paste in first software line (command line)
11. Press Start New Job button
12. Software start to work
13. You can see remaining average time to get code. Calculation time depend from ATI cards you use
14. Please wait to software finish
15. When software finish copy all digits after word Found:
16. Login again via MT Tool by pressing “Download Zone” button
17. Go to SL3 service than click “Get Code”
18. Enter calculated data (result from SL3 LBF Shell software) 15 bytes and imei.
19. If all is ok you will get unlock code for this IMEI

How to Stop Job:
1. If you click on Stop Job please wait to software finish already started part of calculation and write results in log file (*bf_job file). All files are saved to SL3 LBF Shell software folder in format “your_phone_imei.bf_job”.

How to Resume Job:
1. Start SL3 LBF software then click on Resume Job button
2. Software will ask you for bf_job file
3. Select desired job file and wait to software continue job

Please note:
• SL3 LBF software and ighashgpu.exe must be in same folder. Ighashgpu software is included in this installation.
Please read and accept ighashgpu license.txt included in installer.
• To able use SL3 Local Brute Force service you need to have minimum 50 credits on your MT Box account (these credits will not be deducted. Its just authorization credits.
• All support questions regarding SL3 Local Brute Force (hardware requirements etc….) need to be posted in dedicated forum section SL3 Local Brute Force – LBF

Download:
SL3 LBF Shell v0.1 – Rapid Share

What’s new in MT tool v3.21:
Fixed bug ” Can’t Connect to Server.123 ”

Download:
MT Box update tool v3.21

MTBox CG Ver 1.4 Released
* Nokia NaviFirm (Nokia FW downloader) added for free for All MTBox Users
MTB CG Ver 1.4 Download Links:
direct
HotFile
RapidShare

What’s new in MTB NK v2.36.4:
• Fixed RPL support for ‘New Generation’ loaders ( Rapido and Rapu Yama phones)

Please note:
To use MTB NK v2.36.4 you need to have MTB NK 2 36 3 setup installed already.

Using SL3 RPL service you can:
• Repair imei 123456654321?
• Repair SimLock data Failed Read…(Contact Service)
• Repair Superdongle Key – phone turn off in 3-10 minutes,
• Repair APE data on smartphones – Nokia logo long time

How to use SL3 ASK to RPL service:
- Download and install MTB NK 2.36.4 exe
- Start MTB NK 2.36.4
- Go to server tab and click on Delete button
- Click on Save button and enter login details: user name – boxlogin, password: boxlogin
- Connect phone to FBUS cable
- Go to Extras – Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server?
Cost is 80 credits!

- If you want to send ASK file to server press Yes button. 80 MT Box credits will be deducted from your MT box account only once per phone imei.
- If you does not want to send ASK file to server press NO.

How to check it is your RPL file ready:
- Start MTB NK 2.36.4
- Connect phone to FBUS cable
- Go to Extras – Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server.
Cost is 80 credits!

- Press YES button.
- Software will NOT deduct 80 credits from your account.
- Also you can check does your RPL file is ready without any credits on your MT Box account.
- If your RPL file is ready software will download it and write to phone automatically.

Important information about SL3 RPL service:
• SL3 ASK to RPL service cost 80 MT Box credits per phone
• Time for SL3 RPL calculation is up to 72 hours
• Once uploaded ASK file cant be canceled from calculation

Please note:
Posting ASK or RPL files, PHONE IMEI and PUBLIC ID on forums are STRONGLY PROHIBITED.

So please when post about your problem edit last 6 digits from phone imei, delete PUBLIC ID (RAP) from log file before post it.
Breaking this rule will cause your support account closed and MT Box blocked for all services.
RPL files are calculated files and there CANT be any mistake in.
Once again do not upload ASK or RPL file to forum, PHONE IMEI and PUBLIC ID.

Setup 2 36 3
MTB NK 2 36 4

What’s new in MTB NK v2.36.3 setup:
• SL3 RPL service started. Repair bad imei 123456789xxxxxxxx on all SL3 phones now is available. The phone will be restored to its factory state.
• Automatically add installed data packages to models list, even if not existing in phoenix.ini ( will not show phone public name ).
• Refined search for model ( bug when search for RM-5 and it find RM-540 instead ). It still does it wrong if one types ‘RM-5′ in combo and press ‘Enter’. This can’t be fixed as it is automatically done by Windows. But if after typing ‘RM-5′ one presses ‘Down arrow’ MT will use different search algorithm and correctly find 2300.
• Added support for Life Timer reset on new models (x2, x3-02…)
Note: in order for the changes to take effect, phone needs to be restarted after operation, of factory default settings to be executed.
• Improved ‘Update’ button in SL3 BForce compute. Now will show already computed codes (unlocked).
• Added common folder for Dynamic Camera config. Some users don’t install full versions of flash, so they can’t configure the camera after flash. To solve this, MT will look for support files in product folder, if it doesn’t find, it will also look in ‘camconfig’ folder, where a collection of camera configuration files is stored.
• MT tool v3.20

Using SL3 RPL service you can:
• Repair imei 123456654321?
• Repair SimLock data Failed Read…(Contact Service)
• Repair Superdongle Key – phone turn off in 3-10 minutes,
• Repair APE data on smartphones – Nokia logo long time

How to use SL3 ASK to RPL service:
- Download and install MTB NK 2.36.3 exe
- Start MTB NK 2.36.3
- Go to server tab and click on Delete button
- Click on Save button and enter login details: user name – boxlogin, password: boxlogin
- Connect phone to FBUS cable
- Go to Extras – Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server?
Cost is 80 credits!

- If you want to send ASK file to server press Yes button. 80 MT Box credits will be deducted from your MT box account only once per phone imei.
- If you does not want to send ASK file to server press NO.

How to check it is your RPL file ready:
- Start MTB NK 2.36.3
- Connect phone to FBUS cable
- Go to Extras – Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server.
Cost is 80 credits!

- Press YES button.
- Software will NOT deduct 80 credits from your account.
- Also you can check does your RPL file is ready without any credits on your MT Box account.
- If your RPL file is ready software will download it and write to phone automatically.

Important information about SL3 RPL service:
• SL3 ASK to RPL service cost 80 MT Box credits per phone
• Time for SL3 RPL calculation is up to 72 hours
• Once uploaded ASK file cant be canceled from calculation

Please note:
Posting ASK or RPL files, PHONE IMEI and PUBLIC ID on forums are STRONGLY PROHIBITED.
So please when post about your problem edit last 6 digits from phone imei, delete PUBLIC ID (RAP) from log file before post it.
Breaking this rule will cause your support account closed and MT Box blocked for all services.
RPL files are calculated files and there CANT be any mistake in.
Once again do not upload ASK or RPL file to forum, PHONE IMEI and PUBLIC ID.

What’s new in MT tool v3.20 beta:
• Fixed bug ” Can’t Connect to Server.123 ”
• Added new button ” Box Stats ”

Now you can see:
• Your box update history
• MT box credits information
• Available services for your MT Box
• SL3 service status
• All your unlocked SL3 phones with codes and used credits
• All used services on MT server with prices and time
• Box credits recharge history

First run of “Box Stats” will open your default browser window and ask you to register with your name and email address.
After registration validation link will be sent to email address you enter upon registration process.
Please to all who use Yahoo, Hotmail, Gmail and other free email services check your Spam or Junk folder if no validation link received in 10 minutes.
Recommended browsers all except Internet Explorer (because of their rigid security settings)

Download:
MTB NK 2.36.3 setup – Rapid Share link
MTB NK 2.36.3 exe only – For these who have 2.36.1 installed already – Rapid Share link
MT Box update tool v3.20 beta

This is an application for information purposes and checking by one mouse click thought USB interface/ No need NSM Account, no need NSM credits:
* The GriffinTeam SL3 Server time status (how many time next uploaded phone will be ready)
* Phone model
* Firmware version
* Phone IMEI
* Phone Product Code
* Phone life timer
* SIM-Lock Self-Test
* SECURITY Self-Test
* SUPERDONGLE Self-Test
* SIM-Lock information (un/locked state, provider (key), config key)
* Code Counters (by k’board & F-Bus)
* Root Key HASH
http://mt-box.nazwa.pl/pub/NSManager.rar

What’s new in MTB NK v2.36.1:
• SL20 RPL procedure fixed
• RAP3 SL3 read fixed
• Added detect whether TX2 line was connected when rebuilding Certificates ( RPL write)
• Increased Erase timeout, hoping to solve problems with 6303ci flash over USB

Download:
MTB NK 2.36.1 setup
MTB NK 2.36.1 exe only – For these who have 2.36 installed already

Unlock SL1, SL2, SL3, DCT4/+/RSA Free for All MTBOX Users !!!
* Make box update by upd tool 3.18/19 (SL20 activation free for all now)
* Enter to MTB NK exe user name and password = boxlogin
* SL1/2 make unlock by “SL20RPL” button
* SL3 make unlock by “LBF” solution
* DCT4/+ make unlock by “Unlock” button
Discussion : Unlock SL1, SL2, SL3, DCT4/+, Free for All MTBOX USers !!!

There is explanation how to use SL3 Local Brute Force for MT Box.
To use this service you can use also old software versions MTB NK 2.35.3 SL3 and MT Box update tool v3.18
To able calculate unlock data for your phone you need to download “ighashgpu” software from Ivan Golubev web page.
Before you use “ighashgpu” software please read and accept License Agreement which is included in software package

How to use SL3 Local Brute Force:
1. Upload phone to SL3 server using “Read” button in BF tab
2. Cancel phone from calculation queue, double click on phone imei in BF tab
3. Start MT tool v3.18 or v3.19
4. Press “Download Zone” button, we recommend to use Mozilla Firefox as your default browser
5. In “SL3 Service” tab click on “Get BF data” and enter imei from canceled phone the press “Get Data” button. You will get command line for ighashgpu software (Brute Force software by Ivan Golubev)
6. Start ighashgpu software and wait to finish (Calculation time depend from your PC hardware power)
7. When software finish login again via MT tool by pressing “Download Zone” button
8. Go to SL3 service than click “Get Code”
9. Enter phone imei and calculated data (result from ighashgpu software) 15 bytes.
10. If all is ok you will get unlock code for this IMEI
All support questions regarding SL3 Local Brute Force (hardware requirements etc….) need to be posted in dedicated forum section SL3 Local Brute Force – LBF

Please note:
To able use SL3 Local Brute Force service you need to have minimum 50 credits on your MT Box account (these credits will be deducted when upload phone (step1) and back to your account when you cancel phone from queue (step2.))

- To use SL3 Local Brute Force i hope all you know which hardware requirements need.
- All who does not want to waste time and money with buying expensive PC’s Griffin Team SL3 server is ready.

What’s new in MTB NK v2.36:
• Read Ask DCT4 and auto send to server for computation
• RSA Forgery when SimLock damaged (fffff)
• USB Flash E71 and the likes
• Dynamic camera config after flash (option in Automatic actions when flashing)
• Broadcomm USB flashing (tested on x2)
• Certificate backup when possible through USB ( X2)
• N73 FBUS flashing ( blank display after flash)
• USB flashing of 5130 ( phones are too slow in erase and had to increase timeout for erase)
• New flash loaders
• Added new MT Box update tool v3.19
• Added support for MT Box with serial number 4xxxxxxxxx (Error: “Unable to locate the MT-box interface”)

To be added in next days:
• Many USB features (Certificate backup and restore… etc)

Broadcomm Nokia X2 USB flashing log:

Download:
MTB NK v2.36 – Rapid Share link
MT Box update tool v3.19

New improvements:
Added Alcatel NCK/SPCK codes calculator (free feature for registered members)
* C700
* C701
* C707
* C717
* C820
* C825
* EL03
* MANDARINA DUCK
* MISS SIXTY
* PLAYBOY
* S215
* S218
* S219
* S320
* S321
* S520
* V660
* V670
* READ 1st! >> ALL-IN-ONE >> NSM User Guides and Manuals
* Official download location – click to download now!
* Visit us on the YouTube HD Channel. Watch now NSM ‘Requesting Files’ tutorial in the HD
* Read more information at The Official Support Forum
* Check latest server file updates at The Official Discussion Board