Please let us introduce a new version of SmartMoto v4.29
With this release we have resolved issues with direct unlock operation for models with ”hardware lock”.
Smart-Clip rules have been updated.

We are glad to inform you that new version of SmartMoto v4.27 is released.
It provides you with such new features:

Direct unlock; Read Unlock Codes; Read User Code; Backup/Restore flash, flex and calibrations; Format FFS operations, for the following models:
Motorola*: EX118 / EX119 / EX223 / WX292 – First in the world!
Avio: A1000
Chat phone: SN50
ZTE: 120F

* Pay attention! These phone models have problems with network detection after flash/format FFS operations. Due to this reason it is required to backup calibration settings before flash / format ffs operations and to restore them afterwards!

MTK platform phone models based on MCU MT6236 are now supported
Flash chip Toshiba TC58FYM7T8C [98009E:2] is now supported
Important changes made into MTK section of SmartMoto software.
Those improvements were required to add support of the new phone models.

We’re proud to announce new release of SmartMoto v4.26 that once again confirms the title of most intellectual and professional solution for MTK platform at the market.
Summing up the work that was performed from the time of last update, the following features were developed:
Fundаmеntally new algorithm of READ CODES and DIRECT UNLOCK procedures for all supported MTK models
With our brand new solution, phone’s unlock procedure for some models will be performed without formatting file system area. It means that no user data (phone book, messages, etc) will be lost after unlocking

Exclusive DIRECT UNLOCK and READ CODES solutions for the following MTK models:
Motorola EX108 / EX109 / EX112 / EX115 / EX122 / EX124g /EX126 / EX128 / EX211 / EX212 / EX245 / WX345 (No more problems with network detect)
Alcatel OT-230D * / VM202 / VM800
AVIO 410 *
Huawei G6150* / G6610* / G6610v * / G7002
Fly Q300, MC145
LG Gb190 *
Movistar Match *
SFR 121 / 1150 / 3440
ZTE R255 / R230 / X760 / G-S213 (Beeline A100)
World’s first READ USER CODE for all supported MTK-based models
If phone is locked with user code, this function allows you to read it without performing ‘format ffs’ operation and without loosing any of private information

Unique option of Backup and Restore NETWORK CALIBRATION for all MTK-based models
Phone’s network calibration contain network settings and affect on a level of GSM signal reception. It’s very important to backup these settings before flash / format ffs operations and to restore them afterwards

Support of new flash chip for Motorola EX211
Samsung NOR chip ID [EC2208-0] Flash size – 32 Mb is now supported

MTK models based on MT6238, MT6239 MCU are now supported

External RAM testing feature added

We present new version of Smart-Clip v5.03, S-Card v3.10 and SmartMoto v4.24

With this release we moved to the next level in servicing MTK-based models. Such new features and improvements have been added to this version:

Developed advanced flashing option for the following phones with NAND flash memory type:
Motorola: EX112 / EX115 / EX122 / EX128
Alcatel: OT-800 / OT-802 / OT-802Y / OT-803 / OT-803D / OT-806 / OT-806D / OT-807 / OT-807D / OT-808 / OT-808G / OT-808M / OT-809 / OT-810 / OT-813 / OT-813D / OT-818 / OT-818D / OT-819 / OT-819D / OT-828 / OT-880 / OT-888 / OT-888D / OT-I802 / OT-I880 / OT-I898 / OT-C819D

Same flash file can be flashed into NAND chips with different page sizes (either 512 or 2048 bytes per page), e.g. OT-802

Added restore backup from one phone with NAND flash memory type into another.
Thus, phone’s firmware will be upgraded
Implemented autodetection and bad blocks marking during the flashing process of the phones with NAND chip.
This new feature helps to fix bad blocks that newly occurred in the phone flash
Added complete handling of NAND bit errors.
Single bit errors are corrected transparently. In case of uncorrectable bit errors presence in phone or it’s backup file, SmartMoto will inform you about it. Also, SmartMoto prevents flashing the backup file with uncorrectable bit errors,
Released direct unlock and read codes options for Alcatel OT-355D.
This dual-sim MTK-model based on MT6223 is now added to the list of supported
Flash files for new MTK models will be uploaded to SmartMoto section (folder mfw) of Boot-Loader v2.0 portal

Please let us introduce new version of SmartMoto v4.23.

The following options were added with this release:
Added Direct unlock, Read/Restore backup and flex for Motorola EX126 (beta testing mode).
Added “Upgrade firmware” option for MTK-based phone models. This and other options are described in details here.
Resolved the issue with phones based on Samsung NAND chip, ID [EC0076-5A003F], Flash size – 64MB, Page size – 512.
Fixed issue with flashing option for the phones based on M18LR256B chip.

And that’s not all!
We also significantly updated MTK flash files archive at Boot-Loader v2.0 portal.
We have added more than 4000 exclusive flash files (above 50 GB) for Alcatel and Vodafone MTK-based models. The archive now contains:

the latest firmware versions;
firmware versions branded to all existing NSP;
all existing language packs;

Please notice that “locked” and “tied to flash type” files are marked. Flash files are suitable for flashing with SmartMoto v4.23 or higher only.

Please let us introduce new version of SmartMoto v4.22
With this release we present the following options:
Modified detection of firmware version for MTK based models.
Improved and accelerated flash structure analyzing process during reading the backup.
Fixed Hardware IMEI reading for Alcatel OT-710 based on Chip M18LR256B. Now there shouldn’t be any issues with this model based on specified above chip.
Resolved the issue with Read codes and Direct unlock for some versions of Motorola WX160 and Alcatel OT-103. Now all hardware versions of specified above models are supported.

Please let us introduce new version of SmartMoto v4.20

With this release we present the following options:
World’s exclusive! Released Read codes and IMEI repair* options for the DUAL-SIM Alcatel MTK models
These options are now available for both IMEI. Switch between primary and secondary IMEI using “work with secondary IMEI” option.

First in the world! Added IMEI repair option for the following models based on MT6253 CPU:
Motorola WX345
Alcatel OT-606
Alcatel OT-710
Alcatel OT-710D

Improved work for phones with NAND flash memory type

* Except phone models based on MT6235 CPU
Detailed IMEI repair and Read codes manuals can be found at Support section of official Smart-Clip web site.

Please let us introduce new version of SmartMoto v4.19 and S-Card v3.09
With this release we present the following options:

Released Backup and Restore Flex options for the following EX-series models:
EX112
EX115
EX122
EX128

Flex files (*.wxfx format) contain default media files (іmages, ringtones), java applications and some phone settings. Flex file suppose to be restored after unlock procedure. Backup and Restore Flex procedures are fast and simple.
Added direct unlock for Motorola WX345 based on MT6253 CPU*
Released direct unlock, flash, restore backup options for the following Alcatel models based on MT6253 CPU:
OT-606
OT-710
OT-710D*

Fixed Hardware IMEI reading for Motorola WX345* based on Chip Samsung-TOP ID [EC2404-0]
Improved direct unlock solution for phones with NAND flash memory type
Added support of Numonyx StrataFlash® Cellular Memory (M18).

* These models are added in beta test mode. It’s strictly recommended to create phone’s backup before performing any operation.

Please let us introduce new version of SmartMoto v4.18 and S-Card v3.08
With this release we present the following options.
World’s Exclusive Direct unlock for the following Motorola MTK models:
EX112
EX115
EX122
EX128
All firmware versions are supported. With our direct unlock solution, the cell phone won’t get locked again after reboot, unlike when unlocking with the server codes.
Released Read codes, Format FFS and Read Backup options for the Alcatel models based on MT6253 CPU
Detailed unlock manual and cable pinouts available at support section of Smart-Clip official web site
Let us remind you about Boot-Loader v2.0 promotion: send us backup from MTK based phone model and receive free bonus access. Backups from phones, based on MT6235 are most necessary.

Please let us introduce new version of SmartMoto v4.17
With this release we present the following exclusive options:
Added direct unlock for the following Alcatel MTK models based on CPU MT6235:
OT-800 / VM800
OT-802
OT-806
OT-807
OT-808
OT-880
MissSixty MSX10

Released support for the Alcatel models based on CPU MT6235 with disabled unlock codes menu*
OT-880 (2FTGMX1 16f XR16PF11)
Developed IMEI repair solution for Alcatel OT-706
Released Restore backup option for the Alcatel and Motorola models based on CPU MT6235 with NAND flash memory type**
Implemented Save FFS to backup option. It allows to save full phone’s file system (phone book, messages, user code etc) in the backup file
Improved work with NAND flash memory type. Bad blocks detection added
Resolved the issue with NAND flash memory type, 512Byte Page size
* In cases if unlock code request is blocked by service provider (handset doesn’t ask / doesn’t accept unlock codes).
** In order to restore backup file, the option “Write full raw backup” should be checked in. Backup file can be restored to the phone it was read from, only.

NOTE: For the Motorola EX-series models, backup files should be created with ‘Save FFS to backup’ option checked in

Please let us introduce new version of SmartMoto v4.16

With this release we present the following options:
Reading of the NCK, NSCK, SPCK, CCK, PCK codes, Format FFS for all available firmware versions of the following Alcatel models based on MT6235 MCU:

OT-800 / VM800
OT-802
OT-806D (dual-sim)
OT-807
OT-808
OT-880
Procedure is simple and fast. No need internet connection or server credits to calculate codes.
Released Format FFS for following Motorola models:
EX112
EX115
EX128
Support of Alcatel models based on MT6253 MCU (beta testing).
“Phone MCU boost mode” option for OT-255 on Chip AMD-UNIFORM ID [1227E-22202200] is fixed.

Note: Support of other Alcatel OT-8XX MTK-based phone models are added in beta test mode.
In case you have the Motorola or Alcatel handsets based on MT6235/MT6253 MCU, please make a backup using LATEST SmartMoto version (v4.16) and send it to us by e-mail along with the log file. We will investigate them and add these models to the list of supported in further updates.

Please let us introduce new version of SmartMoto v4.15

With this update we present exclusive and the most stable solution in the market:
World’s first, fully safe direct unlock option for Motorola WX-series and MTK based Alcatel phone models. One-click solution – unlock process becomes much easier and faster. SmartMoto detects phone’s hardware version and completes unlock process with the minimum user’s intervention.
World’s first, IMEI repair option for Motorola and Alcatel models with auto SP-lock*. No more automatically SP-locked phones.
Support of Alcatel models based on MT6219 MCU
Added Read backup option for the phones based on MT6235 MCU (Motorola EX112/115/128, Alcatel OT-800/802/808 etc). This option is implemented for research purposes. In case you have the phone based on this MCU, please make a backup and send it to us by e-mail. We will investigate it and add these models to the list of supported in further updates.
Researched Micro USB pinout for Motorola and Alcatel MTK-based models

* ‘auto SP-lock’ means that phone gets automatically locked back within few days after ‘IMEI repair’ operation. With this release this issue is solved.

Please let us introduce new version of SmartMoto v4.14
With this release we are glad to introduce fully reorganized and enhanced “Repair IMEI” procedure for Motorola WX-series and MTK based Alcatel phone models.

We are pleased to introduce new version of SmartMoto v4.12.
With this update we present the following:
Support of the following Alcatel models locked with the other version of encoding algorithm:
OT-280
OT-B331
OT-C700
OT-S215
OT-S218
OT-S319
OT-S320
OT-S321
OT-S520
OT-S521
OT-V607

Full support for the following Alcatel models:
OT-C701
OT-S319
OT-355
OT-565
“Phone MCU boost mode” and Restore IMEI options are improved
Hardware IMEI reading for the phones based on Chip AMD-UNIFORM ID [1227E-22302200] is fixed
Resolved the issue “Internal error 0009″ on MT6226 MCU for Alcatel phones

Please let us introduce new version of SmartMoto v4.11

With this release we are glad to introduce IMEI REPAIR solution for the following MTK models:
Motorola: WX160, WX161, WX180, WX181, WX260, WX265, WX280, WX288, WX290, WX295, WX390, WX395
Alcatel: Elle N3, Elle N5, Mandarina Duck, MissSixty, OT-103, OT-203, OT-204, OT-206, OT-208, OT-209, OT-216, OT-222, OT-255, OT-280, OT-303, OT-305, OT-305A, OT-380, OT-383, OT-383A, OT-505, OT-508, OT-600, OT-660, OT-708, OT-B331, OT-C700, OT-C701, OT-C707, OT-C717, OT-C820, OT-C825, OT-I650, OT-S215, OT-S218, OT-S319, OT-S320, OT-S321, OT-S520, OT-S521, OT-S621, OT-S626, OT-V570, OT-V607, OT-V670, OT-V770
Vodafone: 345

Repair IMEI procedure is simple and similar to “Read codes” instruction announced earlier. Detailed manual is located here
Repair option. If you have software bricked phone, you can REPAIR it by flashing with *.mfw flash file.
Note: Incorrect IMEI value (for example, in patched firmware) will produce wrong unlocking codes.

With this release we are glad to introduce following options:

Read unlock codes, Format FFS*, Flash*, Backup/Restore options added for the following Alcatel models:
OT-C701, OT-C707, OT-C717, OT-V670, ELLE N5, Mandarina Duck
OT-C820, OT-C825, ELLE N3, OT-V770
OT-S520, OT-S521, OT-S621, OT-S626, OT-V607, OT-C700, OT-I650, OT-V570
OT-S215, OT-S218, OT-S319, OT-S320, OT-S321, OT-280, OT-B331

(*) NOTE: It’s strictly recommended to make backup copy before performing ‘Format FFS’ or ‘Flash’ procedures, because these options are added in beta-test mode.

Read unlock codes, Format FFS, Flash, Backup/Restore options for Alcatel MissSixty phone model

Communication algorithm for the flashing and backup options of the MTK based phone models improved. Added support for 921600 bps COM-port speed

MTK based phone models that were unlocked via SmartMoto, can be locked back by performing Format FFS procedure. Alternatively phone can be locked by flashing with the locked flash file**.

(**) Locked flash files are marked with the word “locked” in the end of the file name.
http://www.smart-clip.com/smartmoto.php

Please let us introduce new version of SmartMoto v4.09 and S-Card v3.06
With this release we are glad to introduce following options:
1. World’s first! Support of the following Alcatel models with disabled unlock code menu*:
* OT-103 (2ARGTE5-17H XM17CB40; 2ATLMX3-175 XM17NH40)
* OT-203 (2BRGTE5-365 XM36CC20; 2BRGTE5-37B XM37CC30)
* OT-208 (2ARGUG1-765 XM76CE21)
* OT-216 (2ERGMG2-462 XP46CB01)
* OT-303 (2ARGTE2-169 XI16CF00; 2BMSUA1-16G XI16CS13)
* OT-305 (2DCFMK1-16C XP16CU11)
* OT-508 (2BTGMX1-365 XP36NE12)
* OT-708 (2ATGMX1-16G XN16NB25; 2ATLMX1-16G XN16NE21)

2. Read unlock codes, Format FFS, Flash, Backup/Restore options for the following Alcatel models:
* OT-216
* OT-380
* OT-505
* OT-508
* OT-708 (beta test)

3. World Exclusive! Implemented autodetect function for the cell phones with disabled unlock code menu*, activation of unlock code request for all supported MTK-based phone models.
4. Interface improvements. Active unlock codes are now marked black, inactive are marked grey. Cell phone doesn’t ask inactive unlock codes.

* In cases if unlock code request is blocked by service provider (handset doesn’t ask / doesn’t accept unlock codes).

SmartMoto v4.08 & S-Card v3.05

With this release we present the following options:
1. Fully safe flashing (mfw-files), Restore backup options for the WX series phone models:
* WX160
* WX161
* WX180
* WX181
* WX260
* WX265
* WX280
* WX288
* WX290
* WX295
* WX390
* WX395

2. Read codes, Format FFS, Flash (beta), restore backup options for specified below list of Alcatel and Vodafone handsets:
* Alcatel OT-103
* Alcatel OT-203
* Alcatel OT-204
* Alcatel OT-208
* Alcatel OT-209
* Alcatel OT-222
* Alcatel OT-255
* Alcatel OT-303
* Alcatel OT-305А
* Alcatel OT-383
* Alcatel OT-383A
* Alcatel OT-600
* Alcatel OT-660
* Vodafone 345

3. Communication algorithm for MTK based phone models was improved.
Flashing procedure is simple and similar to ‘WX series backup’ instruction announced earlier.
Recommended drivers version for Prolific and FTDI virtual COM ports available here.
NOTE: Backups, that were read from MTK based phone models with SmartMoto v4.07 or older has lower version and can not be restored with SmartMoto 4.08.
Boot-Loader v2.0 promotion: send us backup from MTK based phone model and receive free bonus access. Details
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.

With this release we are glad to introduce following options:
1. Added Format FFS (reset user code) procedure for WX series handsets;
2. Hardware IMEI reading for WX series models based on Samsung flash IC;
3. Improved communication algorithm for WX series phone models;
4. Researched alternative pinout for the MTK handsets

* Check out detailed Format FFS manual and alternative pinout for WX-series models.
http://www.smart-clip.com/smartmoto.php

Please let us introduce new version of S-Card v3.04 and SmartMoto v4.06
With this release we are glad to introduce the easiest and the safest unlock solution on the market.
1. Reading of the NCK, NSCK, SPCK, CCK, PCK codes for all available versions of the following WX series models:
* WX160
* WX161
* WX180
* WX181
* WX260 (beta test)
* WX265
* WX280
* WX288
* WX290
* WX295
* WX390
* WX395
2. Released save backup feature for the specified above phone models.
* Check out detailed Unlock & Backup manuals for specified above WX-series models.
Download here.

Please let us introduce a new version of SmartMoto v4.05.
With this release unlock issue for EM35 model is resolved.
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.
http://www.smart-clip.com

Please pay attention to the following.
It seems that one thing with ZN5 went out of control in SmartMoto v4.03. This version is no longer available. Those, who already installed it – please remove it from your PC.
And now please let us introduce a new version of SmartMoto v4.04.
As you understand, the ZN5 model issue is fixed. No more risk for any handset.
Once again, please accept our apologies for error in previous version. The repair solution for spoiled phones will be released with few days. Please be patience and watch our announcements.
http://www.smart-clip.com

This time we would like to ask all of you, did you have enough of killing MotoMAGX with other fake solution that pretend to be a professional one?

We think, is right about time to stop it!
So, please welcome – Smart-Clip v5.02, S-Card v3.03 and SmartMoto v4.03.
With this release:
1. First in the word, fully working, fully tested and absolutely safe – one button unlock and IMEI repair solution for MotoMAGX models.
* E8
* EM30
* EM35
* U9
* V8_512Mb
* V8_2Gb
* V8_2Gb_Luxury
* VE66
* ZN5
* ZN5_128Mb
* Z6
* Z6w
* Aura
Please remember, this solution will never affect phone’s PDS and there is no risk for the phone!
2. “Automatic Model Detection” option is released.
3. Smart-Clip exclusive. Repair solution for MotoMAGX based models damaged by other solution (Phone freezes at Moto Logo power on stage).*
* Please read the manual carefully before repairing specified above models.
Don’t forget to update all your products and use Smart-Clip Update Zone to update S-Card.
Make sure to update Smart-Clip BEFORE updating the S-Card.
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.
If you wish to receive news on updates immediately, please subscribe to our new SMS notification system.

We are pleased to announce Smart-Clip v5.01 and S-Card v3.02
This release introduces the following improvements:
- optimized unlock algorithm for P2K phone models.
Don’t forget to update all your products and use Smart-Clip Update Zone to update S-Card.
Make sure to update Smart-Clip BEFORE updating S-Card.
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.

Please let us introduce a new version of SmartMoto v4.02.
With this release we present fully safe and tested solution of IMEI repair and unlocking for following models:
* V8_512Mb
* V8_2Gb
* V8_2Gb_Luxury
* Z6
* Aura (beta test)
The procedure is the same as for MotoMAGX based models announced earlier. The IMEI repair option unlocks the handset automatically. More details in the Unlock Manual.
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.
http://www.smart-clip.com

With this release we present IMEI repair solution for MotoMAGX based models:
* E8
* EM30
* EM35 (beta test)
* U9
* VE66 (beta test)
* Z6w
* ZN5
* ZN5-128MB
The procedure is simple. If the phone is unlocked with SmartMoto just press keys 4 and 6, connect phone SmartMoto, log to IMEI repair tab and set repaired number with Write button. In other case – flash the phone with 2 flash files, connect to SmartMoto, log to IMEI repair tab and set repaired number with Write button.
Don’t forget to update all your products and use Smart-Clip Update Zone to update S-Card.
Make sure to update Smart-Clip BEFORE updating the S-Card.
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.

So, please let us introduce a new version of Smart-Clip v5.00, S-Card v3.00 and SmartMoto v4.00.
With this release we are glad to announce the following benefits.
1. Smart-Clip exclusive, unlock solution for MotoMAGX based models:
* E8
* EM30
* EM35 (beta test)
* U9
* VE66 (beta test)
* Z6w
* ZN5
* ZN5-128MB
No TestPoints or server credits required. Just a few easy steps. More details at Unlock Manual. Please pay attention to the manual, as unlock procedure of MotoMAGX models differs from usual and requires SCout multiflasher software.
2. The models W490 and W6 with boot version 0C.A1 are added to the SmartMoto list.
3. Phone model W231 is proved to be supported and added to the list.
4. Boot version 9.02 for the models V23* is supported by Prepare function.
Don’t forget to update all your products and use Smart-Clip Update Zone to update S-Card.
Make sure to update Smart-Clip BEFORE updating the S-Card.
We recommend using only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.

Boot-Loader v.2.0 is the support zone for Octopus, Smart-Clip, SCout Dongle and Dreambox. This version introduces a number of improvements compared to the previous version of Boot-Loader.
Boot-Loader Download Manager
Boot-Loader Download Manager is a powerful tool for firmware downloads:
* No speed or stream limits – download speed has become much higher
* Support for low speed and unstable connections
* Flexible download management
* Integration with Boot-Loader web site
Boot-Loader Web Site
Boot-Loader v.2.0 is a complete new system. It meets all requirements of modern web and offers many useful features and improvements.
* Built-in messaging system – you can receive messages from the support team and exchange messages with other users
* Powerful system for device management – you can manage your Octopus, Smart-Clip, SCout and Dreambox devices
To sign up for the Boot-Loader v.2.0, please visit https://www.boot-loader.com

[hidepost]We are pleased to introduce a new version of SmartMoto v3.23.
With this release we present the following options.
1. Updated CDMA communication library.
2. Introduced new stabilized algorithm for patching CDMA models.
http://www.smart-clip.com/[/hidepost]

[hidepost]We are pleased to introduce a new version of SmartMoto v3.22 and S-Card v2.12.
With this release we present the following options.
1. Supported new CDMA models: V750, VE20, VU30 and ZN4 – World’s Exclusive!
* Read info
* Read/Restore ESN and MEID
* Read hardware ESN, MEID
* Reset User/Security code
2. Read/Restore akey, ssd & prl for NAM2.
3. Read/Restore EVDO settings.
4. New types of flash chips are added to the list of supported.
Detailed manual for the specified above CDMA models is located at SmartMoto section of www.smart-clip.com.
Please don’t forget to update all your products and use Smart-Clip Update Zone to update S-Card.
We recommend to use only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.[/hidepost]