We have investigated the issue of some malfunctioned HTI.
Our programmers/technicians together with NXP technicians
discovered the cause of malfunctioned HTI.
This malfunction is based on the flash memory of main IC.
This malfunction is show only after few firmware updates.
In total are 642 pcs IC with flash memory malfunction.

NXP provided us with full list of IC unique ID serials, called OTP ID.
Due security reasons and on NXP request, we are not able to post this serials.
But we made an application where you can check if your HTI have
this malfunction IC, application based on HTI OTP ID serial.

Here is the link to check if your HTI have malfunction IC:
Check HTI

We updated HTI software and now you can read OTP serial number
(this is the factory unique ID serial number for each main IC from NXP)
We advice you to update your software by synchronize, read OTP ID serial number
and you can check by yourself if your HTI is from this 642 pcs.

How to update:
- Open mobileEx.exe, Click “Synchronize Files” and
Click “Update” when popup dialog showed.

Go to this web site, type your HTI OTP ID
and press “Check HTI”.

Check HTI

If your HTI have IC with hardware malfunction,
you will get this message:
Your HTI have NXP chip with hardware malfunction.
Please send to your reseller for exchange.

WE CHANGE FREE OF COST ALL HTI WHAT HAVE
THIS HARDWARE IC MALFUNCTION.

THE EXCHANGE WILL BE DONE THRU
RESELLERS and ONLY THIS WAY.

SEND YOUR BOX TO RESELLER,
RESELLER WILL SEND TO US AND WE CHANGE IT.

EVEN IF YOUR HTI NOT HAVE MORE WARRANTY
(older then 6 months)
WE CHANGE IT FREE OF COST

BR,
Manole

Comments Off
Filed under: Hardware products, MX-KEY, Unlock Solutions

Samsung SGH-T759 Exhibit 4G Unbrick – Boot Repair supported

Samsung T759 is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in some cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.

To resurrect Samsung T759:

•  Solder JTAG cable to Samsung T759 JTAG pads;
•  Connect USB cable to phone and PC;
•  Attach battery connector;
•  Make sure Samsung T759 is selected in the list of models;
•  Make sure a fixed TCK frequency is selected;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press Power-On.

Comments Off
Filed under: Hardware products, RIFF JTAG Box, Unlock Solutions

PolarSuite Update v2.8.2
(more…)

Comments Off
Filed under: Hardware products, PolarBox 2, Unlock Solutions

Blackberry

Added Bulk Calculations by IMEI and MEP or PRD, now you calculate as many imeis as you want in the same time.
To use this click on options button in Blackberry Tab.
Select: Select IMEI from file, all your imei must be listed in .txt file.
select your mep or prd and calculate.

To DOWNLOAD:

Press GO SUPPORT BUTTON IN SOFTWARE UNDER APPLICATION SETTINGS.

THIS WILL ALLOW YOU TO ENTER SUPPORT AREA AND DOWNLOAD LATEST EXES AND FLASH FILES.

New User Download link:

www.nckdongle.com/NCKDongleSetup.exe

Alcatel Standalone Calculations for: OT117, Ot217,OT217D, OT262，
(more…)

Comments Off
Filed under: Hardware products, NCK Dongle, Unlock Solutions